An extremely rugged switch mode mains power supply with built in cooling fan for mobile radio base stations. 13.6V DC output @ 9A. Supplied with mains lead with 13A plug and crimp connectors for output lead.A battery can be connected to the rear of the unit to maintain power in the event of a mains failure. This model is suitable for Hytera MD series radios, however we can also supply a specific model PSU to suit specific types of mobile radios (Please see "Download" tab for a list of radio models suitability). Lead time on special models will be a week (depending on Alfatronix's stock availability). This unit is so reliable that it is supplied with the manufacturer no quibble life time warranty. SPECIAL FEATURES * Input Voltage Range: Auto-select, 85-135V AC and 170-265V AC, 50Hz/60Hz * Output Voltage & Current: 13.6 V DC. Worst case limits are +/- 4%,108W (9A) * Output Noise: <50mV pk-pk at continuous load * Power Conversion Efficiency: Typically 83% * Isolation Between Input and Case/Output: 1.5kV AC/3.0kV AC rms * Isolation Casework to Ground: Connected directly to mains input ground * Normal Operating Temperature: 25°C to +30°C / +30°C to +70°C de-rate linearly to 0A * Storage Temperature: -25°C to +100°C * Max Case Temperature: 70°C at full load with 25°C ambient * Operating Humidity: 95% max, non-condensing * Casework: Anodized aluminium, glass-filled polycarbonate * Connections: Input - IEC-320 C14 socket, C13 terminated cordset Output - 6.3mm push-on blade terminals Ground - 6.3mm push-on blade terminals, adjacent to output (additional external ground if required) * Output: Indicator Green LED mains output on Orange LED battery back up mode * Mounting Method: By rubber feet on base and direct attachment to radio above * Safe area protection: Over current - Limited by current sensing circuit Over heat - Limited by temperature sensing circuit Transients - Protected by filters and rugged components Catastrophic failure - Protected by input and output fuses * Approvals: 2014/30/EU The general EMC directive 2014/35/EU The low voltage directive 93/68/EEC The CE marking directive * Tested to: EN60950, EN55022, EN61204-3 * Markings: CE Please note radio in the image is for illustration purpose only.
- Bar Code/EAN: