The radio cable p/n SLCAB13I is designed to work with our SignaLink USB sound card radio interface as well as our older SignaLink SL-1+ model. It is ~3 feet in length and has a male 13-pin DIN plug on the radio end and an 8-pin RJ-45 plug on the SignaLink end.
This cable is compatible with virtually all Icom radios that have a 13-pin DIN Accy Port. This includes but is not limited to the radios listed below.
If your radio is not listed below then be sure to check our other eBay auctions or contact us. We have a number of different SignaLink part numbers available to fit most standard radios.
Compatible Icom Radios
**NOTE: These radios also have a 6-pin mini-DIN Data Port connection. The 6-pin Data port is generally preferred over the 13-pin Accy Port because the Accy Port sometimes doesn't mute the microphone (simply turn the radio's Mic Gain down or unplug the mic if this is the case with your radio) or it only works on HF (check your radio manual). If your radio has a 6-pin mini-DIN Data Port and you would like to use it instead of the 13-pin Accy Port then see our other eBay listing for the radio cable p/n SLCAB6PM.
NOTE: This radio cable CANNOT be used with the IC-275 and IC-970 due to the radio's non-standard Accy Port jack. If you want to use the SignaLink with these two radios then you will need to connect it to the mic jack using our radio cable p/n SLCAB8R.
- Bar Code/EAN: